Sharp SD-EX200 - Manual (Page 19)

19
SD-EX200
03/3/14 SD-EX200_sec.fm TINSZ0523AWZZ
2
3
4
5
6
7
8
1
CD Pla
y
ba
c
k
- A
d
v
a
n
ced
CD
Pl
ay
b
a
ck
-
„ Programmed play
You can choose up to 20 selections for playback in the order you like.
To clear the programmed selections:
Press the CLEAR button while the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button
on the remote control. The "MEMORY" indicator will disappear and all the pro-
grammed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the last track
of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the or button.
Each time the button is pressed, track numbers will be displayed in order.
Notes:
z Ejecting a CD automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or the
function is changed from CD to some other, the programmed selections will not be
cleared.
z During program operation, random play is not possible.
z Programmed tracks will be erased if the unit is unplugged or a power failure
occurs.
1
Press the button.
2
Press the MEMORY button to enter the programming save mode.
3
Press the direct buttons to select the desired track.
Playback order Playback time
You can program the track by pressing the MEMORY button after selecting it
with the
or button.
4
Repeat step 3 for any other track. Up to 20 tracks can be pro-
grammed.
5
Press the button.
6
Press the button to start playback.