System connections, Speaker connection – Sharp SD-EX200 User Manual
Page 12
12
SD-EX200
03/3/14
SD-EX200_sec.fm
TINSZ0523AWZZ
Prepara
tion f
o
r U
s
e
- S
y
s
te
m
c
onne
c
tion
s
-
System connections
Speaker connection
Connect the wire with the black line to the (-) and the transparent one to the (+).
Caution:
How to open side covers
Open the right and left side covers to connect the system.
Right speaker
Left speaker
AM loop antenna
FM antenna
Bass Reflex Duct
z
Make sure to unplug the AC power cord before connecting the speaker
wires.
z
Connect the speaker wires to the speakers first, then to the unit.
This prevents short circuit between and terminals.
z
Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
ers can damage the unit.
z
Do not mistake and , and right and left terminals of the speaker wires. (The right
speaker is placed on the right when you face the unit.)
z
Do not let the bare speaker wires touch
each other.
z
Do not short-circuit the speaker wires. If
the power is turned on, malfunction may
occur.
z
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z
Do not stand or sit on the speakers. You may
be injured.
Note:
Left speaker
Right speaker
There is no physical distinction between the
right and the left speakers.
2
1
3
Right speaker
Left speaker
Black line
Transparent
Black line
Transparent
Transparent
Black line
Incorrect
Incorrect