Symphonic CHSP80G - Manual (Page 86)

86
Others
EN
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
General Operation
Discs
Timer Recording / Recording & Navigator
Error
Prohibited timer program.
Error message Cause & Solution
• The entry for the Timer Recording is invalid. The recording duration must
be in 24 hour period. The end time must be later than the present time,
and the start time must be before
1-1-2055. Re-program the Timer
Recording correctly. (See pages 28-3 1.)
Error
Cannot register timer program.
• The maximum number of timer programs is exceeded.
Delete unnecessary timer programs. (See page s 28-3 1 .)
Disc Error
Error message Cause & Solution
• Invalid disc is inserted. Please insert a disc supported by this unit.
(See page 56.)
Region Error
--Please eject the disc.--
Playback is not authorized
in your region.
--Please eject the disc.--
Playback feature may not
be available on this disc.
• A disc with the invalid region code is inserted.
This unit only supports the discs with region code
1 or ALL.
Error
Timer program starts soon.
Error message Cause & Solution
• The operation is not available.
• The operation is not available since a Timer Recording will start soon.
Playback / Editing
Error message Cause & Solution
Parental Lock On
The current selected parental level
prohibits playback.
• The current Parental Lock setting prohibits the playback.
Change the Parental Level. (See page
83-84.)
E41A1CD(56-96).qx3 06.3.2 11:55 AM Page 86