Seagate Pipeline HD Mini Series SATA ST9250311CS - Manual (Page 35)

Pipeline HD Mini Series SATA Product Manual, Rev. A 29
59 Number of sectors transferred during a Read Multiple or
Write Multiple command
xxxx
H
60–61 Total number of user-addressable sectors
This field contains a value that is one greater than the
total number of user-addressable sectors. The maximum
value that shall be placed in this field is 0FFFFFFFh. The
0FFFFFFFh value applies to all capacities over
137Gbytes (see Section 2.2 and 2.3 for related informa-
tion).
ST9250311CS = 0FFFFFFFh
ST91603110CS = 0FFFFFFFh
62 Retired 0000
H
63 Multiword DMA active and modes supported
(see note following this table)
xx07
H
64 Advanced PIO modes supported (modes 3 and 4 sup-
ported)
0003
H
65 Minimum multiword DMA transfer cycle time per word
(120 nsec)
0078
H
66 Recommended multiword DMA transfer cycle time per
word (120 nsec)
0078
H
67 Minimum PIO cycle time without IORDY flow control
(240 nsec)
00F0
H
68 Minimum PIO cycle time with IORDY flow control (120
nsec)
0078
H
69–74 ATA-reserved 0000
H
75 Queue depth 0000
H
76 Serial ATA capabilities 0508
H
77 ATA-reserved 0000
H
78 Serial ATA features supported 0048
H
79 Serial ATA features enabled 0040
H
80 Major version number 003E
H
81 Minor version number 0000
H
82 Command sets supported 306B
H
83 Command sets supported 4001
H
84 Command sets support extension 4000
H
85 Command sets enabled 30xx
H
86 Command sets enabled 0001
H
87 Command sets enable extension 4000
H
88 Ultra DMA support and current mode
(see note following this table)
xx7F
H
89 Security erase time 0000
H
90 Enhanced security erase time 0000
H
92 Master password revision code FFFE
H
93 Hardware reset value
(see description following this table)
xxxx
H
Word Description Value