Sony alpha DSLR-A500 - Manual (Page 152)

152
Printing images
Specifying DPOF
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying /unspecifying DPOF on selected images
1
MENU button t 1 t [Specify Printing] t [DPOF setup]
t [Marked images] t [OK]
2
Select the image with b/B on the controller.
3
Select the number of sheets with the center of the controller.
• To unspecify DPOF, set the number to “0.”
4
Press the MENU button.
5
Select [OK] with v on the controller, then press the center of
the controller.