Sharp Notevision XG-MB67X-L - Manual (Page 48)

44
Adjusting the Projected Image
(“SCR - ADJ” menu)
Pict.
Resize
Image Shift 0
0
SCR - ADJ PRJ Net.
Keystone
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Front
English
On
Logo
On
Off
Normal
SEL./ADJ. ENTER END
Help
8
7
6
5
4
3
2
1
1 1 1 1 1 Setting the Resize Mode
• For details of the Resize mode, see pages 34
and 35 .
• You can also press HRESIZE on the remote
control to set the resize mode. (See page 34 .)
Note
2 2 2 2 2 Adjusting the Image
Position
You can move the projected image vertically.
Q button
• You cannot set this item when “Resize” is set
to “Normal”.
Note
O button
Menu operation n Page 40
3 3 3 3 3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
For Manual Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “Off”, select “Keystone”, and
then adjust with the slide bar.
For Auto Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “On”.
O button Q button
Manual Correction
• The Keystone Correction can be adjusted up
to an angle of approximately ±13 degrees
(when “Resize” is set to “Normal”).
Note
See page 33 for details of Keystone Correction.
XG-MB67XL_EN_CD_j 06.9.11, 6:50 AM 44