Samsung SCC-B5366 - Manual (Page 22)

22 – DIGITAL COLOR DOME CAMERA
How to use OSD Menu
If you press the SETUP switch with a NIGHT sub
menu selected, you will see a menu where you can
set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output
together with the black-and-white composite video
signal. If BURST is set to OFF, the Burst signal does
not output.
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
AUTO
The camera will automatically switch between
DAY and NIGHT mode, according to the lighting
condition.
If you press the SETUP switch with an AUTO-
based sub menu selected, you will see the
appropriate screen.
‹AUTO‹
BURST OFF
DAYÆNIGHT
BRIGHTNESS
MID
DWELL TIME 2S
NIGHTÆDAY
BRIGHTNESS
MID
DWELL TIME 5S
MASK AREA 1 2
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAY ÆNIGHT sets the
brightness degree of color to BW switching,
•
for which you can select from LOW, MID, and
HIGH. As you adjust it from HIGH to LOW, the
screen switches to black and white mode under
the darker situation.
DWELL TIME of DAY
ÆNIGHT sets the time to
maintain switched black and white mode.
The BRIGHTNESS of NIGHT ÆDAY sets the
brightness degree of BW to color switching,
for which you can select from LOW, MID, and
HIGH. As you adjust it from HIGH to LOW, the
screen switches to color mode under the darker
situation.
DWELL TIME of NIGHT ÆDAY sets the time to
maintain switched color mode.
The MASK AREA menu is used to prevent
unintended mode switching or inability of
determining the switching due to existence of
high spot light source at night.
If you press the SETUP switch in item 1 or 2 of
the MASK AREA menu, you will see a menu
where you can specify an area to MASK.
‹MASK AREA‹

❖
•
