Sony CMT-LS1 - Manual (Page 15)

Basic Operations
15
1
Press TUNER BAND repeatedly until
the band you want appears.
Each time you press the button, the band
changes as follows:
FM
y AM
2
Press PLAY/TUNING MODE
repeatedly until “PRESET” appears.
3
Press TUNER +/– to select the desired
station’s preset number.
Preset number * and frequency
* When you preset only one station, “ONE
PRSET” appears in the display.
To Do this
Turn off the radio Press ?/1 to turn off the
power.
Adjust the volume Press VOL +/–.
To listen to non-preset radio
stations
• Press PLAY/TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNER + or – repeatedly to tune in the desired
station (
Manual Tuning ).
• Press PLAY/TUNING MODE repeatedly until
“AUTO” appears in step 2, then press
TUNER + or –. The frequency indication
changes and scanning stops when the system
tunes in a station (
Automatic Tuning ).
To cancel the Automatic Tuning
Press PLAY/TUNING MODE.
Tips
• You can switch from another source to the tuner by
pressing TUNER BAND ( Automatic Source
Selection ).
• If you press TUNER BAND while the power is off,
the power turns on and the system tunes in the last
received station automatically (
One Touch play ).
• To improve broadcast reception, reorient the
supplied antenna or connect an optional external
antenna (FM antenna only).
• When an FM program has static noise, press
STEREO/MONO until “MONO” appears. There
will be no stereo effect, but the reception will
improve. Press again to restore the stereo effect.