Sub-Zero Sub-Zero EN - Manual (Page 16)

Wine Storage Use & Care 16
GLASS DOOR CLEANING
The glass door panel can be cleaned using any standard
glass cleaner available on the market today.
INTERIOR CLEANING
To clean interior surfaces and removable parts, wash with
a mild solution of soap and lukewarm water with a little
baking soda. Do not use vinegar. Rinse and dry thor-
oughly. Avoid getting water on lights, control panel and the
solid cherry wood facing on the shelves.
Do not use abrasive cleaners or cloths on any of the
interior or exterior surfaces, including the glass door
panel.
Before cleaning the unit, shut off power to the unit at
the control panel.
Under no circumstances should you use a metallic
or highly abrasive cleaner or cloth, as this will
remove the carbon finish or scratch the classic or
platinum finishes.
Cleaning
STAINLESS STEEL EXTERIOR
Classic and platinum stainless steel finishes: To clean
the exterior of the classic and platinum stainless steel
finishes, use a soft, nonabrasive stainless steel cleaner like
Signature polish and apply with a soft 100% lint-free cloth.
Signature polish is available from Signature Limited
Laboratory, P. O. Box 13436, Dayton, Ohio 45413-0436,
or 877-376-5474 (toll free).
Carbon stainless steel finish: The carbon stainless steel
finish uses the interest of brushed steel to bring out the
maximum metallic luster of its charcoal background.
Carbon stainless steel can be cleaned with mild soap and
water.
Different light types and source locations can result in
variations in shading on different components and areas
of large appliances. These variations are normal with the
carbon finish and add to the unique character of colored
stainless steel.
To bring out the natural luster of all three finishes, lightly
wipe the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. All work should
follow the grain direction of the finish. Better results are
obtained by keeping the cloth in continuous contact with
the stainless steel.