Sub-Zero Sub-Zero EN - Manual (Page 13)

DRAWER DIVIDER
Each drawer of the model 427R has a divider that can be
easily removed.
To remove, pull the drawer divider forward and pivot the
back edge of the divider away from the back of the
drawer. Reverse the procedure to reinstall the divider.
Refer to the illustration above.
Wine Storage Use & Care 13
subzero.com
Refrigerator Drawers—Model 427R
DRAWER REMOVAL
IMPORTANT NOTE: For model 427R, you must disconnect
the control cable before removing the top drawer. Refer to
the illustration below.
To remove a drawer from the model 427R, pull the drawer
open until it stops. Lift up evenly on both sides of the
drawer front and pull out, as shown in the illustration
below.
IMPORTANT NOTE: Be sure to unload the contents before
removing the drawer.
To replace a drawer, raise the front of the drawer up and
place onto the drawer slide tracks. Be sure to engage the
front holes of the drawer slide with the small pegs at the
end of each rail.
Drawer divider.
Before removing the top drawer of the model 427R,
you MUST disconnect the control cable.
Control cable.
Drawer removal.