Smart Technologies SMARTBoard 480iv - Manual (Page 65)

Submenu setting Description
Power Turns the projector on or puts it into Standby mode.
Select the Power ON or Power OFF button.
Volume Adjusts the projector’s volume from 0 to 40.
Mute Turns the mute settings on or off. Select On to mute the projector’s
sound and Off to turn off mute.
Volume Control Enables volume control. Select On to enable volume adjustment and
select Off to disable volume adjustment if you prefer to use your audio
system or speaker (not included) controls.
Source Adjusts the input source to VGA1, Composite or S-Video.
Emergency Alert Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Alert Message Displays an on-screen emergency notification message (maximum
60 characters).
A P P E N D I X A
Remotely managing your interactive whiteboard system
55