Smart Technologies SMARTBoard 480iv - Manual (Page 26)

Setting Use Notes
Network menu
Network Activates the network features.
Status Displays the current network status
(Connected, Disconnected or Off).
DHCP Displays the status of the network’s
Dynamic Host Condition Protocol
(DHCP) as On or Off. On automatically assigns the DHCP
server’s IP address to the projector.
Off enables an administrator to assign
an IP address manually.
Password
Reminder E-mails the network password to the e-
mail recipient. See Web page management on page
54 to set up a destination e-mail
address.
IP Address Displays the projector’s IP address in
values between 0.0.0.0 and
255.255.255.255.
Sub Mask Displays the projector’s subnet mask
number in values between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s network
gateway in values between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector’s domain name
server IP address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
Group Name Displays the projector’s workgroup
name as set by an administrator
(maximum 12 characters).
Projector Name Displays the projector’s name as set
by an administrator (maximum 12
characters).
Location Displays the projector’s location as set
by an administrator (maximum 16
characters).
Contact Displays the contact name or number
for projector support as set by an
administrator (maximum 16
characters).
C H A P T E R 3
Using your interactive whiteboard system
16