Sony RDR-GX3 - Manual (Page 48)

48
Recording From Connected Equipment Without a Timer
If the timer settings of a Synchro-Recording and
another timer recording overlap
Regardless of whether or not the programme is a Synchro Rec
programme, the programme that starts first has priority and the
second programme starts recording only after the first
programme has finished.
Recording From Connected
Equipment Without a Timer
Connect a VCR, digital tuner, or similar device to the LINE 3,
LINE 2 IN or LINE 4 IN jacks (pages 27 to 28). Then, follow the
steps below to make a recording on this recorder.
a Turn on your TV and this recorder, then set
it to the connected channel (“VIDEO,” etc.).
b Press Z, and place a recordable disc on the
tray.
c Press Z to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
d Press INPUT SELECT to select a input
source according to the connection you made.
The front panel display changes as follows:
e Press REC MODE repeatedly to select the
recording mode.
The recording mode changes as follows:
7:00 8:00 9:00 10:00
First programme
Second programme
will be cut off
TOOL
M / m , ENTER
X REC PAUSE
x REC STOP
Z
REC MODE
INPUT SELECT
L2 L1 L3 L4
Programme
position
HQ SP LP EP HSP SLP