Sharp Aquos LC 20S5U - Manual (Page 32)

Useful Features (Continued)
30
CLOSED CAPTION
■ Setting CLOSED CAPTION
• This LCD TV set is equipped with an internal Closed
Caption decoder. “Closed Caption” is a system which allows
conversations, narration, and sound effects in TV programs and
home videos to be viewed as captions on the TV screen (see
the illustration).
• Not all programs and videos will offer closed captioning. Please
look for the “ ” symbol to ensure that captions will be shown.
• The Closed Caption broadcasts can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are
available: CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and
commentaries of TV dramas and
news programs while allowing a
clear view of the picture.
The TEXT mode displays various
information over the picture (such as
TV program schedules and weather
forecasts, etc.) that is independent
of the TV programs.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CLOSED CAPTION ”, and press
ENTER.
Press '/" to change the CLOSED CAPTION setting,
and press ENTER.
O F F
C C 1
C C 2
T 1
T 2
A
•
CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
Press MENU to exit.
Directly setting the CLOSED CAPTION
Press CC to display the CC/TEXT screen.
C C / T E X T [ O F F ]
Press CC to change the setting.
CC/TEXT [OFF]
CC/TEXT [T2] CC/TEXT [T1]
CC/TEXT [CC1]
CC/TEXT [CC2]
A
•
CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
A
• If a broadcast contains Closed Caption data and MUTE is
pressed, the LCD TV set enters CLOSED CAPTION mode
automatically. Pressing MUTE again will return the LCD TV set
to its previous condition.
• Closed Caption may malfunction (white blocks, strange
characters, etc.) if signal conditions are poor or if there are
problems at the broadcast source. This does not necessarily
indicate a problem with the LCD TV set.
• If any button is pressed to call up the on-screen display while
viewing a Closed Caption broadcast, the closed captions will
disappear momentarily.
• If no TEXT broadcast is being received while viewing in the
TEXT mode, the screen may become blank for some programs.
Should this occur, switch the CLOSED CAPTION mode to
“OFF”.
• If you select “CC1”, “CC2”, “T1” or “T2” (or MUTE is pressed)
while “VIEW MODE” is set to “ZOOM” or “STRETCH”, “VIEW
MODE” will be changed to “4:3” or “16:9” automatically.
4
1
2
5
3
1
2
LC-20S5U_E.indb 30 2005/12/15 11:19:46