Sharp Aquos LC 20S5U - Manual (Page 25)

Basic Adjustment Settings (Continued)
23
AUDIO Adjustments
You can adjust the sound quality to your preference with the
following settings.
Press MENU to display the Menu screen.
Press \/| to select “AUDIO”.
Press '/" to select a specific adjustment item.
AUDIO� � SETUP� ��OPTION
T R E B L E � [ � � � ] ﾐ � � � � � � � � +
B A S S � � � [ � � � ] ﾐ � � � � � � � � +
B A L A N C E [ � � � ] L � � � � � � � � R
R E S E T
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
FILM MODE
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it, and then
recreates each still film frame for cinematic picture quality.
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 22.
Press '/" to select “FILM MODE”, and press ENTER.
� � O N
� � O F F
Press '/" to select “ON”, and press ENTER.
Press MENU to exit.
A
• Set “FILM MODE” to “ON” manually to detect a film-based source
(originally encoded at 24 frames/second).
• “FILM MODE” cannot be set when 480P, 576P, 720P or 1080 I
signal is received from the COMPONENT terminals.
1
3
2
4
A
• The items on the AUDIO menu cannot be set when headphones
are not used and “INPUT3 SELECT” is set to “OUT VAO”.
• When resetting all adjustment items to factory preset values,
perform the following procedure.
1 Press '/" to select “RESET” in the AUDIO screen, and press
ENTER.
2 Press '/" to select “YES”, and press ENTER.
3
1
2
4
5
Selected item \ button | button
TREBLE For weaker treble For stronger treble
BASS For weaker bass For stronger bass
BALANCE Decrease audio from
the right speaker
Decrease audio from
the left speaker
LC-20S5U_E.indb 23 2005/12/15 11:19:23