Siemens HT-Q100 - Manual (Page 8)

ENG
14 13
CONNECTIONS
Speaker Accessories
Before Connecting the Speakers
Please confirm that all the following contents are included in the package.
Front Speaker (2EA)
Front Stand (2EA) Subwoofer Speaker Speaker Cable (3EA)
Assembling the Speakers
Speaker Packages
Set the front speaker on the front stand.
To mount the speaker on the wall
Drive a screw into the wall for each speaker and
then hook the front speaker over them.
Hook the speakers so
that the screws are in the
position of the figure.
Front Speaker (L) Front Speaker (R)
Subwoofer
Connecting the Speakers
Black
Press down the terminal
tab on the back of the
speaker. 1 Insert the black wire into the
black terminal (–) and the red
wire into the red (+) terminal,
and then release the tab. 2 Connect the connecting plugs to the back
of the Home Theater.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
3
Red
• Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
Caution
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the speak-
er. If this occurs, place the speaker away
from your TV set.
Note
or
1p~40p(Q100)-XAA 2006.4.18 12:22 PM Page 16