Siemens HT-Q100 - Manual (Page 25)

ENG
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
4
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
• If you have selected Level 6, you can-
not view DVDs with Level 7 or higher.
• The higher the level, the closer the
content is to violent or adult material.
3 5
Press Cursor
button to move to
‘PARENTAL’ and then
press
ENTER button.
Press Cursor , but-
ton to select the desired
rating level and then press
ENTER button.
Enter the password
and then press
ENTER button.
Note
SETUP
47
2 1 In Stop mode,
press
MENU
button.
Press Cursor
button to move to
‘Setup’ and then
press
ENTER button.
Use this to restrict playback of adult or violent DVDs you do not want children to view.
Setting Parental Controls (Rating Level)
4
• Enter the old password, a new pass-
word, and confirm new password.
• The setting is complete.
3 5
Press Cursor button to
move to ‘PASSWORD’
and then press
ENTER
button.
Press ENTER
button.
Enter the password
and then press
ENTER button.
2 1
Press MENU button.
Press Cursor
button to move to
‘Setup’ and then
press
ENTER button.
• The password is set to "7890" by default. Note
If you have forgotten the rating level password, do the following:
• While the player is in the no disc mode, hold the main unit's button for longer than 5 seconds. “INITIALIZE” appears
on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You can set the password for the Parental (rating level) setting.
Setting the Password
48
ENTER MOVE EXIT
ENTER RETURN MOVE EXIT SELECT RETURN MOVE EXIT RETURN INPUT NUMBER EXIT
ENTER MOVE
MOVE ENTER EXIT MOVE ENTER EXIT
EXIT
MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT RETURN INPUT NUMBER EXIT
41~64p(Q100)-XAA 2006.4.18 12:22 PM Page 6