Siemens HT-Q100 - Manual (Page 10)

ENG
18 17
CONNECTIONS
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video signal digitally without the process of converting to analog.
You can get sharper digital pictures by connecting the video to your TV using an HDMI con-
nection cable.
HDMI Function
HDMI Audio ON/OFF function
• The audio signals transmitted over the HDMI Cable can be toggled
ON/OFF.
Press the HDMI AUDIO button on the remote con-
trol.
• This toggles between “ AUDIO ON” and “AUDIO OFF” on the display.
• AUDIO ON : Both video and audio signals are transmitted over the
HDMI connection cable, and audio is output is through your TV speak-
ers only.
• AUDIO OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
• The default setting value of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• If you turn the unit off and on, or switch functions when the HDMI
AUDIO is set to ON, the HDMI AUDIO is automatically set to OFF.
Note
Resolution Selection
• This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
• Resolutions available for the HDMI output are 480P, 720P and 1080i.
• SD(Standard Definition) resolution is 480p and HD(High Definition) reso-
lution is 720p/1080i.
Example: If the TV supports resolution up to 480p:
Press the SD/HD button.
• A 480p video signal is output through the HDMI output.
• If the TV does not support the configured resolution, you will not be able
to see the picture properly.
• Since this product has an embedded Video Upscaler function with
Faroudja DCDi technology, it can enhance a 576i(480i) DVD resolu-
tion output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home
Theater and TV will be automatically adjust themselves to the opti-
mal resolution and aspect ratio if connected to HDMI. (If the TV is
an HDTV and has an HDMI Input jack, output is automatically con-
verted to 1080i resolution (if supported by the TV).)
• For component video output, only 480P is supported.
• When both HDMI and COMPONENT jacks are connected, COMPO-
NENT video is not displayed.
• See your TV owner's manual for more information on how to select
the TV's Video Input source.
Note
1p~40p(Q100)-XAA 2006.4.18 12:22 PM Page 20