Siemens HT-Q100 - Manual (Page 29)

ENG
56
To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 54 to automatically
or manually tune in to a station.
• Press the TUNER MEMORY button before
‘number’ disappears from the display.
• ‘number’ disappears from the display and the
station is stored in memory.
• “1” flashes in the display.
2
5
Press TUNING/CH to
select "89.10".
Press the TUNER MEMORY
button again.
6 To preset another station,
repeat steps 2 to 5.
RADIO OPERA
TION
1
Press the TUNER button to
select the FM band.
• You can select between 1 and 15 presets.
4
Press to select
preset number.
3 Press the TUNER
MEMORY button.
Example: Presetting FM 89.1 in the memory
Presetting Stations
55
• This unit does not receive AM broadcasts. Note
41~64p(Q100)-XAA 2006.4.18 12:22 PM Page 14