Siemens HT-Q100 - Manual (Page 23)

ENG
44
SETUP
OSD (On-Screen Display) language is set to English by default.
Setting the Language
43
* If the language you selected is
not recorded on the disc, menu
language will not change even
if you set it to your desired
language.
Selecting the
OSD Language
Selecting the
Audio Language (record-
ed on the disc)
2 1 In Stop mode,
press
MENU
button.
Press Cursor but-
ton to move to
‘
Setup’ and then
press ENTER button.
4
• Once the setup is complete, the OSD will be
English if English has been selected as language.
3
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
Select ‘ Language’
and then press
ENTER button
5
Press Cursor ,
button to select ‘
OSD
Language’ and then
press
ENTER button.
Press Cursor , but-
ton to select the desired
language and then press
ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
• To select another language, select OTHER and enter the language code of your country.
(See page 64 for language codes)
AUDIO, SUB TITLE and DISC MENU language can be selected.
Note
MOVE ENTER EXIT MOVE ENTER EXIT MOVE ENTER EXIT RETURN MOVE ENTER EXIT RETURN
RETURN ENTER MOVE EXIT RETURN ENTER MOVE EXIT RETURN ENTER MOVE EXIT RETURN MOVE EXIT
MOVE SELECT EXIT RETURN
ENTER
MOVE SELECT EXIT RETURN
41~64p(Q100)-XAA 2006.4.18 12:22 PM Page 2