SIIG CYBER 1S1P PCI - Manual (Page 8)

8
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
Windows 95/98/98SE/ME
1. From the Device Manager window double click
Ports (COM & LPT), then double click CyberSerial
PCI... serial port.
2. Click Settings tab, at the Port Name box click the
down arrow and select a COM address that is not
currently in use.
3. Click OK, click OK again to close Device Manager
to save the changes.
Windows 2000/XP/Server 2003
1. From the Device Manager window double click
Ports (COM & LPT), then double click CyberSerial
PCI... serial port.
2. Click Settings tab and click Advanced....
3. At the COM Port number box, click the down arrow
and select a COM port that is not in use. Click OK.
4. Click OK, then close Device Manager to save the
changes.