SIIG CYBER 1S1P PCI - Manual (Page 5)

5
Windows ME Driver Installation
1. At the Add New Hardware Wizard, choose Specify
the location of the driver (Advanced), then click
Next.
2. Check Specify a location, uncheck the other box,
insert the driver CD, type in D:\Me, then click
Next. (Change D: to match your CD-ROM drive
letter)
3. Click Next and Finish.
4. Repeat steps 1-3.
5. Restart Windows to complete the installation.
To Verify Successful Installation In Windows 95/98/
98SE/ME:
1.
From the main desktop, right click My Computer,
click Properties, then click Device Manager.
2. Double click Ports (COM & LPT), CyberSerial PCI
16Cxxx..., Printer Port..., and CyberParallel PCI
should be displayed.
3. Double click Multi-function adapters, SIIG
CyberPro 1S1P PCI board should be displayed.
Windows NT 4.0 Driver Installation
1. From the desktop click Start, then Run.
2. Insert the driver CD, type in
D:\NT4\Install_Serial.exe, then click OK. (Change
D: to match your CD-ROM drive letter)
3. Click Next when the Welcome window appears.
4. Choose Install, then click Next.
5. Click Yes, then click Exit.
6. From the desktop click Start, then Run.