SIIG CYBER 1S1P PCI - Manual (Page 7)

7
2. Insert the driver CD, check Include this location in
the search, uncheck the other check box, type in
D:\XP, and click Next. (Change D: to match your
CD-ROM drive letter)
3. At the Hardware Installation window, click
Continue Anyway, then Finish. Our driver has been
tested for stability and compatibility.
4. Repeat steps 1-3 two more times.
5. Restart Windows to complete the installation.
Windows Server 2003 Driver Installation
1. At the Found New Hardware Wizard, choose Install
from a list or specific location (Advanced), then
click Next.
2. Insert the driver CD, check Include this location in
the search, uncheck the other check box, type in
D:\2003, and click Next. (Change D: to match your
CD-ROM drive letter)
3. At the Hardware Installation window, click
Continue Anyway, then Finish. Our driver has been
tested for stability and compatibility.
4. Repeat steps 1-3 two more times.
5. Restart Windows to complete the installation.
To Verify Successful Installation In Windows 2000/XP/
Server 2003:
1.
Right click My Computer, click Manage, then select
Device Manager.
2. Double click Ports (COM & LPT), CyberSerial PCI
16Cxxx... andCyberParallel PCI... should be
displayed.
3. Double click Multifunction adapters, SIIG
CyberPro 1S1P PCI board should be displayed.