Sony ICF-SC1PC - Manual (Page 6)

Using the receiver on AC power
Plug in the supplied AC power adaptor in to the DC IN
6V jack.
to a wall outlet
Notes
*Do not twist or crumple the AC power adaptor cord forcefully.
Do not place any heavy object on the cord.
*To disconnect the AC power cord, pull it out by the plug, not the
cord.
*When you are not using the receiver for an extended period of
time, disconnect the AC power adaptor both from the wall outlet
and the receiver.
Using the receiver on a car battery
Plug in the car battery cord (not supplied) to the DC IN
6V jack.
For more information, consult the Operating Instructions
for the car battery cord.
Notes
*Turn off the power when plugging or unplugging the AC power
adaptor or the car battery cord from the DC IN 6 V jack.
Otherwise, the power may be cut off and may appear in the
display. In this case, press POWER to turn the power on again.
The display will disappear.
*When using the receiver on batteries, unplug the AC power
adaptor or the car battery cord from the DC IN 6 V jack on the
receiver. The receiver will not be powered by the batteries as
long as the DC IN 6V jack is plugged in.
If you plug in the AC power adaptor or the car battery cord to
the DC IN 6 V jack, the power will automatically switch to
external power even if the batteries are installed.
*Use only the supplied/recommended AC power adaptor and car
battery cord.
Polarity of the plug
*The display will be lit with the backlight when you are using the
AC power adaptor or the car battery cord (see “Turning on the
light”, page 32).
6