Sharp MX-3100N User Manual
Page 78
1-37
This section explains how to place originals in the automatic document feeder and on the document glass.
PLACING THE ORIGINAL
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞
2. COPIER "
☞
4. FACSIMILE "
☞
5. SCANNER / INTERNET FAX "
" (page 5-50)
Allowed original weights
1-sided scanning: 9 lbs. to 32 lbs. (35 g/m
2
to 128 g/m
2
)
2-sided scanning: 13 lbs. to 28 lbs. (50 g/m
2
to 105 g/m
2
)
To scan originals from 9 lbs. to 14 lbs. (35 g/m
2
to 49 g/m
2
), use "Slow Scan Mode" in the special modes. Scanning
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
ORIGINALS
Minimum original size
Maximum original size
Standard sizes
(Minimum size that can be automatically detected)
8-1/2" (height) x 5-1/2" (width)
A5: 210 mm (height) x 148 mm (width)
Non-standard sizes
(Minimum size that can be specified manually)
5-1/8" (height) x 5-1/2" (width)
131 mm (height) x 140 mm (width)
Standard sizes
(Maximum size that can be automatically detected)
11" (height) x 17" (width)
A3: 297 mm (height) x 420 mm (width)
12" x 18" size paper (A3W) cannot be used.
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 11-5/8" (height) x 17" (width)
297 mm (height) x 432 mm (width)
Image send mode: 11" (height) x 39-3/8" (width)
297 mm (height) x 1000 mm (width)
1
Make sure an original does not remain
on the document glass.
Open the automatic document feeder, make sure that an
original is not on the document glass, and then gently close the
automatic document feeder.