Sharp MX-3100N - Manual (Page 680)

7-34
SYSTEM SETTINGS
Contents
Network Settings
Printer Settings
Item Factory default setting Page
■ Network Settings
7-69
●
IPv4 Settings DHCP 7-69
● IPv6 Settings Disabled 7-69
●
Enable TCP/IP Enabled 7-69
● Enable NetWare Enabled 7-69
●
Enable EtherTalk Enabled 7-69
● Enable NetBEUI Enabled 7-69
●
Reset the NIC – 7-69
● Ping Command – 7-69
Item Factory default setting Page
■
Printer Settings
7-70
● Default Settings 7-70
X Prohibit Notice Page Printing Enabled 7-70
X Prohibit Test Page Printing Disabled 7-70
X A4/Letter Size Auto Change Disabled 7-70
X Print Density Level
7-70 ‹ Color 3
‹ Black & White 3
X CMYK Exposure Adjustment 0 7-70
X Bypass Tray Settings 7-70
‹ Enable Detected Paper Size in Bypass Tray Disabled 7-70
‹ Enable Selected Paper Type in Bypass Tray Enabled 7-70
‹ Exclude Bypass-Tray from Auto Paper Select Disabled 7-70
X Job Spool Queuing Enabled 7-70
● Interface Settings 7-71
X Hexadecimal Dump Mode Disabled 7-71
X I/O Timeout 60 sec. 7-71
X Enable USB Port Enabled 7-71
X USB Port Emulation Switching Auto 7-71
X Enable Network Port Enabled 7-71
X Network Port Emulation Switching Auto 7-71
X Port Switching Method Switch at End of Job 7-71
●
Auto Color Calibration – 7-72