Samsung HW-C560S - Manual (Page 39)

39
ENG
●
SETUP
SETTING DOLBY PRO LOGIC II MODE
This mode provides 5.1 channel sound from 2 channel sources.
Press the PROLOGIC button on the remote control.
MOVIE : Adds realism to the movie soundtrack.
MUSIC : Provides 5.1 channel surround sound for digital, analog or existing stereo sources.
GAME : Enhances the excitement of the game’s sound.
MATRIX : You will hear 5.1 channel surround sound.
PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
SETTING DOLBY PRO LOGIC II
This function works only in Dolby Pro Logic ll MUSIC mode.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select DPLII SETUP, and then press the
ENTER or ► button.
Press the ▲▼ buttons to select the option you want, and then press the
ENTER or ► button.
PANORAMA : You can set it ON or OFF.
(This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.)
DIMENSION : You can set from -7 to +7.
(Incrementally adjusts the sound fi eld (DSP)from the front or surround.)
C- WIDTH : You can set from 0 to 7.
(This sets the width of the center sound image. The higher the setting,
the less sound comes from the center speaker.)
PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC.
You cannot use Dolby Pro Logic II mode for multi channel signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
•
•
•
•
•
1.
•
2.
3.
4.
•
•
•
M



Ж
Ж
Ж
Ж
HW-C500-C560S-XAA_0609.indd 39 HW-C500-C560S-XAA_0609.indd 39 2010-06-09 5:11:32 2010-06-09 5:11:32