Sony 3-213-480-12(1) - Manual (Page 15)

15
H
ook
ups
and
Se
tti
n
gs
Connecting to the SCART jack
Connect to the LINE 1-TV jack using a SCART cord (not supplied). Be sure to make the connections
firmly to avoid hum and noise.
See the operating instructions supplied with the TV to be connected.
When you use this connection, select “Video” or “RGB” for the Line 1 output setting in step 14 of Easy
Setup (page 23).
Note
When you connect the recorder to your TV via the SCART jacks, the TV’s input source is set to the recorder
automatically when you turn the recorder on. If necessary, press TV/VIDEO on the remote to return the input to the TV
(page 21).
SCART INPUT
TV or projector
SCART cord
(not supplied)
VCR-DVD recorder
to i LINE 1-TV
: Signal flow
,continued