Setup, Unpacking box contents, Notice – Woodstock W1737 User Manual
Page 14
-12-
W1737/W1738 Owner's Manual (Mfg. 10/09+)
SE
TU
P
The following is a description of the components
shipped with the
SHOP FOX
®
W1737/W1738. Lay the
components out, and use
Figure 9 and the list below
to inventory your package. If any parts are missing,
find the part number in the back of this manual and call
Woodstock International, Inc. at 360-734-3482 or e-mail:
Sanding Unit (Not Pictured)
..............................(1)
Dust Ports 4"
................................................(3)
Sanding Belt 100 Grit
.....................................(1)
Sanding Belt 180 Grit
.....................................(1)
Platen Graphite Flap
......................................(2)
Platen Felt
..................................................(1)
Tool Box
.....................................................(1)
—Phillips Head Screwdriver #2
..........................(1)
—Standard Screwdriver #2
...............................(1)
—Open-End Wrench 8/10mm
............................ (1)
—Open-End Wrench 12/14mm
..........................(1)
—Open-End Wrench 17/19mm
..........................(1)
—Metric Hex Wrench Set
.................................(1)
—Door Keys
.................................................(2)
—Ceramic Limit Switch Rods
............................(2)
—Flexible Grease Gun Extension
.......................(1)
—Platen Removal Tool
....................................(1)
—Fuses 4 Amp
..............................................(2)
Item
Qty.
Figure 9. Parts and tool inventory.
Unpacking
Box Contents
The Model W1737/W1738 has been carefully packaged
for safe transporting. If you notice the machine has been
damaged in shipment, contact your machine dealer and
the shipping company immediately.
SETUP
SUFFOCATION
HAZARD!
Immediately discard
all plastic bags and
packing materials to
eliminate
choking/
suffocation hazards for
children and animals.
To gain access to the lag bolts that attach the machine
to the shipping pallet, you must temporarily remove
both lower side panels.
NOTICE