Sharp YO-190 - Manual (Page 4)

2
<
LCD CONTRAST
>
–DARK
–LIGHT
FREE UP MEMORY ?
DO YOU WANT TO
( Yes/No )
<
KEY SOUND
>
1: ON
2: OFF
• A “ ” mark moves to your selection and you return to the mode in
which you were before pressing MENU .
Adjusting the LCD Contrast
1. Press MENU NEXT 2 to select “2: LCD CONTRAST”.
2. Press or to darken or lighten
the display.
3. Press C•CE after adjusting the
contrast.
Turning the Key Sound On and Off
1. Press MENU PREV 1 to select “1:
KEY SOUND”.
2. Press 1 to turn the key sound on, or
press 2 to turn it off.
Freeing Up Memory
When you turn the power on, the following message may be displayed,
asking you to free up memory by deleting unnecessary space.
Press Y to delete space. Freeing up
memory needs a maximum of
approximately 2 minutes.
Press N when you wish to start
operation immediately.
(Refer to page 16.)
Display Symbols
: A “beep” will sound when a key is pressed.
: The schedule alarm will sound.
CAPS : Capital (uppercase) letters will be entered. To enter small
(lowercase) letters, turn “CAPS” off by pressing CAPS .
EDIT : The listing on the display can be edited.
2nd : Indicates that 2nd has been pressed. Pressing another key in
succession, to which the special function is assigned, performs
the function, for example as introduced on page 31, “Shortcuts”.
: More information exists above the current display. (Press .)
: More information exists below the current display. (Press .)
S : Secret function is in effect. (Secret listings cannot be recalled
without a password.)
: Indicates that the recalled listing is secret.
BATT : Indicates that the operating battery level is low.
• In the display examples of this manual, only the symbols necessary for
explanation will be shown.
NOTES:
• The symbol “ ” shown by setting the LCD contrast to DARK is not
used in this product.
• The “ ” mark indicates the alarm sound for the scheduled listings is
turned on.
Display Symbols and Part Names