Chapter 5 operations, 1 preliminary checks before starting operation, 2 power connection – Samsung SVR-440 User Manual
Page 57
57
Chapter 5 Operations
5.1 Preliminary Checks before Starting Operation
. Before Power up, be sure to check NTSC or PAL and select the right monitor out put between
Composite and VGA by using the switch on the rear panel of the unit. See the details as below.
Video mode
Video output
SETTING
NTSC
PAL
BNC
VGA
Factory Default
O
X
O
X
X
O
O
X
O
X
X
O
X
O
X
O
5.2 Power Connection
. Connect the Power cable to power up the unit.
. After power-up, the presence of video input signals is automatically recognized.
. All setting values are kept even after a sudden power failure.