Siemens MT50 - Manual (Page 74)

Fax/data mode using a PC
72
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 11:00)
©
S
ieme
ns A
G
20
01,
I:
\M
O
BI
L\K
45\
MT
50
-M
an
ta
-a
lt
es
D
es
ig
n\EN
G
LI
SC
H
\mi
tL
G
_Fr
eig
ab
e_
020
22
5\
D
RUC
K\
MT
50
_S
et
up
.f
m
Fax/data
mode using a
PC §Menu§ ¢ Setup ¢ Connectivity
¢ Fax/data mod.
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
data communication/fax communi-
cation must be available on your PC
and there must be a connection to
the phone.
F ax and data services must be ena-
bled by the service provider. Differ-
ent networks support different types
of fax/data reception, please contact
your service provider for details.
§Change§ Set the required mode.
Fax/data mod.
Your service provider has given you a
number for telephoning and a fax/
data number.
Send
Start your PC communication pro-
gram and enter the required destina-
tion phone number in the program.
Receiving
The call is signalled by a special ring-
er and the type of call (fax or data) is
displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.
Send vce/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following soft key is available for
two seconds:
§Voice/fx§ Switch to Send vce/fax
mode; you may now send
a fax.
Voice/fax rec
(Only if a special fax or data number
is not available).
Start the required communication
program in your PC and switch on
the function at the phone during the
call (the PC accepts the connection).
End transmission
End transmission with PC software
and/or press S .
~
~