Remote button descriptions – Sony TA-VE700 User Manual

Page 21

For buttons not described on previous pages and buttons with names different from the buttons on the main unit.

Remote Button Descriptions

Function

Selects preset numbers.

Selects track numbers.
0 selects track 10.

Selects channel numbers.

Scans and selects preset
stations.

Selects preset channels.

Selects station index
names for index select
tuning.

Skips discs (CD player
with multi-disc changer
only.)

Searches tracks (forward
or backward).

Fast forwards or rewinds.

Skips tracks.

Pauses play or record.
(Also starts recording
with components in
record standby.)

Starts play.

Stops play.

Starts play on the reverse
side.

Sets tape decks to the
record standby mode.

Starts recording when
pressed with ( (or 9
on tape deck).

Selects tape direction (for
tape decks with the RMS*
function.)

Clears RMS* programme
(for tape decks with the
RMS function.)

Remote
Button

0-9

CH/PRESET
+/–

INDEX

D. SKIP

0/)

=/+

(

r + (

RMS
DIRECTION

RMS CLEAR

Operates

Tuner

CD player/MD
deck/LD player

TV/VCR

Tuner

TV/VCR

Tuner

CD player

Tape deck/MD
deck/VCR/LD
player

CD player/
MD deck/LD
player

CD player/
Tape deck/MD
deck/LD
player/VCR

Tape deck

Tape deck/
MD deck/
VCR

Tape deck

Operates

Tape deck

TV/VCR

TV/VCR/
LD player

VCR

—

Function

Programmes tracks (tape deck
with the RMS* function only).

Changes channels when used
with 0-9.

Selects input signal: TV input
or video input.

Turns on or off the power.

Turns on the TV, switches the
input to “TV,” and sets the
remote to operate the TV.

Selects the channel entry
mode, either one or two digit
(in Europe only).

Selects preset channels for the
small picture.**

Changes the position of the
small picture.**

Swaps the small and the large
picture.**

Activates the picture-in-
picture function.**

Jumps back and forth between
the previous and current
channels.

Selects output signal from the
antenna terminal: TV signal or
VCR programme.

Normally, adjusts the master
volume of the amplifier.
If TV CONTROL ON was
pressed, it adjusts the volume
on the TV.

Normally, mutes the sound
from the amplifier.
If TV CONTROL ON was
pressed, the sound on the TV
itself is muted.

Not applicable.

Remote
Button

RMS
DIRECTION

9/(

ENTER

TV/VIDEO

VISUAL
POWER

TV CONTROL
ON

-/- -

SUB CH +/–

POSITION

SWAP

P IN P

JUMP

ANT TV/VTR

MASTER VOL
+/–

MUTING

SLOPE

BAND

* RMS: Random Music Sensor
** Only for Sony TVs with the picture-in-picture function

Note

Some Sony equipment cannot be controlled by this remote as
shown in the table above.