Sony ZS-X3CP - Manual (Page 24)

24
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 3.2-ohm loads, both channels driven from
150 - 10,000 Hz; rated 1.8 W per channel-
minimum RMS power, with no more than 10 %
total harmonic distortion in AC operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about
200 mm from the objective lens surface on the optical
pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
General
Speaker
Full range: 10 cm (4 in.) dia.,
3.2
Ω
, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68
Ω
impedance headphones
Power output
2.3 W + 2.3 W (at 3.2
Ω
, 10 % harmonic
distortion)
Power requirements
DC IN 9V jack accepts:
Supplied AC power adaptor for use with 120 V AC,
60 Hz
9 V DC, 6 size D (R20) batteries
Battery life
For CD playback:
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 14 h
Dimensions
Approx. 430
Ч
172
Ч
287.5 mm (w/h/d)
(17
Ч
6 7 ⁄
8
Ч
11 3 ⁄
8
inches) (incl. projecting parts)
Mass
Approx. 4.6 kg (7 lb. 11 oz) (incl. batteries)
Supplied accessories
AC power adaptor (1)
Design and specifications are subject to change without
notice.
Optional accessories
Sony MDR headphones series