Sony DSLR-A100 - Manual (Page 14)

14
1 Make sure that the (Super SteadyShot) switch is set to ON to activate the function.
2 Press the shutter button halfway down, and then press it fully down.
Super SteadyShot scale
This scale is displayed whenever the Super SteadyShot function is activated. A higher scale
indicates more pronounced camera-shake (on a scale of five).
When the Super SteadyShot function is deactivated, the scale will not be displayed.
(Camera-shake warning) indicator
This indicator flashes regardless of the status of the Super SteadyShot function. It indicates the
likelihood of camera-shake calculated from the shutter speed and focal length. If the indicator
flashes, reduce the camera-shake by setting the
(Super SteadyShot) switch to ON or
using the built-in flash or a tripod.
• The Super SteadyShot function may not work optimally when the power has just been turned on, when the
subject has just entered the frame, or when the shutter button has been pressed all the way down without
stopping halfway. Wait for the Super SteadyShot scale to go down, and then press the shutter button down
slowly.
• When the subject is within a very close range, such as in macro, the Super SteadyShot function may not be
able to cancel out the effect of camera-shake. In such cases, deactivate the Super SteadyShot function and
mount the camera on a tripod.
• This Super SteadyShot function can reduce the effect of camera-shake by the equivalent of approximately
2 to 3.5 increments of shutter speed. The Super SteadyShot function is less effective with moving subjects
or with shutter speeds of 1/4 second or longer, which are typically used in night-time shooting. In such
cases, deactivate the Super SteadyShot function and mount the camera on a tripod.
• When using a tripod, deactivate the Super SteadyShot function as it will not be fully effective.
Super SteadyShot function
(Super
SteadyShot)
switch
(Camera-shake
warning) indicator
Super SteadyShot
scale