Samsung ML-1200 - Manual (Page 13)

S ETTING U P Y OUR P RINTER 2.9 S ETTING U P Y OUR P RINTER 2.8
1 Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type x:\cdsetup.exe
in the Open box (where x is the drive letter for the CD-ROM
drive), then click OK.
Installing the Printer Software from the CD-ROM
Note: If the New Hardware
Found box appears during
the installation procedure,
click the x in the upper
right corner of the box,
or click Cancel.
SA MS
UNG ML-1200 Seri
es
2 When the opening screen appears, select the appropriate
language.
3 Click Install the Samsung Software on your PC.
Install the Printer Software
Install the Printer Software
Included with your printer is a CD-ROM containing the printer
driver for some of the most popular Windows software
applications. To operate your printer, you must install a printer
driver, which translates data from your application into data
that the printer understands.
If you are printing with a parallel interface (ML-1210 Only)
Go to page 2.9 for information on installing the print software
on a computer that is attached directly to the printer with a
parallel cable.
If you are printing with a USB interface
Go to “Using Your Printer with a USB Cable” on page A.10 , for
information on installing the print software on a USB-enabled
computer.
If you are printing from Macintosh
Go to “Using Your Printer with a Macintosh” on page A.16 , for
information on installing the print software and printing from
Macintosh.
If you are printing in Linux
Go to “Linux Driver Installation” on page A.23 , for information
on installing the Linux driver.
Verify the following:
• At least 16 MB or more of RAM is installed on your PC.
• There is at least 50 MB of free disk space on your PC.
• All applications are closed on your PC before beginning
installation.
• Windows 95, Windows 98, Windows Me, Windows NT 4.0 or
Windows 2000.
Before Installing the Printer Software