Sharp TL-M5200 - Manual (Page 49)

47
Appendix
Specifi cations
„ Product specifi cations
Model
Item
TL-M5200
LCD Panel Advanced Super View & BLACK TFT LCD
Screen size 52 1 /
32
” (1322 mm measured diagonally)
Active View Size
Wide x High
45 23 /
64
” x 25 33 /
64
” (1152 mm x 648 mm)
Resolution 2,073,600 pixels (1920 x 1080 )
Pixel pitch 0.600 mm (H) x 0.600 mm (V)
Brightness 450 cd/m 2
Max. colors 16.77M colors (8 bits/color)
Viewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Backlight 60,000 Hours *1 (at Backlight Standard position)
Audio amplifi er 15 W x 2 (4 Ω)
Terminals Rear Computer input 1
Audio input 15-pin mini D-sub connector (RGB/Component *3 )
Ø3.5 mm stereo minijack
Computer input 2
Audio input 5BNC *2 connector (RGB/Component *3 )
Ø3.5 mm stereo minijack
Monitor output
Audio output 15-pin mini D-sub connector (RGB/Component *3 )
Ø3.5 mm stereo minijack
Speaker output LR push release speaker terminals
LAN 8-pin RJ-45 modular connector
RS-232C 9-pin D-sub connector
DVI-D *4
Audio input
24-pin (Compatible with HDCP)
Ø3.5 mm stereo minijack
HDMI input 19-pin (Compatible with HDCP)
Side S-Video input
Video input
Audio input 4-pin mini Din connector
RCA connector
RCA connector
OSD language English/French/Spanish/Italian/German/Dutch/Japanese
Power Requirement AC 100-240 V, 50/60 Hz
Power Consumption 312 W
Stanby Power Consumption 34 W (Mode1), 1.4 W (Mode2), 0.3 W (Mode3) at AC 120 V
Weight
61.8 lbs./28.0 kg (without Temporary Stand)
Dimension (W x H x D) 48 61 /
64
” x 28 43 /
64
” x 3 63 /
64
” (without Temporary Stand)
Operating Temperature 32°F - 104°F (0°C - 40°C)
Operating Humidity 30% - 80% (no condensation)
*1 The typical period of time after which the backlight power output will have decreased by about half, given
that the monitor is used continuously at 77°F under standard lighting and brightness conditions.
*2 Plug-and-play is not supported.
*3 Cannot be used simultaneously.
*4 Connection is only allowed with an HDCP-compatible device.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.