Sharp TL-M5200 - Manual (Page 37)

35
Operation
„ Ecology
When set to “Yes”, The monitor activates the
following power saving mode.
• “OPC” set to “On” (Page 32)
• “Standby Mode” set to “Mode2” (Page 38)
• “No Operation Off” set to “3 Hours” (Page 34)
• “Power Management” set to “Mode1” (Page 34)
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
Note
Setup menu
Setup Option
Set Inputs
Input Label
Position
Password
Keylock
Fine Sync
DHCP Client
RS-232C
TCP/IP
Status
All Reset
Auto Restart
Standby Mode
„ Setting a password
(Password)
If you do not want others to change the setting
for the “Setup” menu, set a password.
1 Select “Password”, then press ENTER.
• The screen for entering the password appears.
Enter your new password.
Use 4 digits.
Old Password ----
----
---
MENU [Setup---Password]
New Password
Reconfirm
2 Press ▲/▼ to set the fi rst digit in “New
Password”, then press ►.
3 Enter the remaining 3 digits, then press ENTER.
• To return to the previous digit, press ◄.
4 Enter the same password in “Reconfi rm”, then
press ENTER.
• The status for “Password” changes to
“ (enable)”.
• Once the password is set, you must enter the password
to change the “Setup” menu settings.
Note
Menu operations