Sharp DV-SL80U - Manual (Page 9)

– 9 – EN
HOOK UPS
NOTES:
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Operation Manuals for your TV, stereo system and any other components to be connected to the DVD player.
• This player does not support DTS audio.
Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck
Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital
input jacks such as MD Deck or Dat Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
A/V-compatible
or
wide screen TV
AUDIO OUT
DIGITAL AUDIO OUT
COAXIAL
L Y
VIDEO OUT CB / PB S-VIDEO OUT
CR / PR COMPONENT VIDEO OUT
R
To COAXIAL DIGITAL
AUDIO OUT jack
To VIDEO INPUT jack To VIDEO OUT jack
To S-VIDEO
INPUT jack
To S-VIDEO
OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
or
NOTES:
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Set “DOLBY DIGITAL” to “DPCM” for audio output in the setup mode. Playing a DVD using incorrect settings may generate
noise distortion, and may also damage the speakers. (Refer to page 15 to change the audio settings.)
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxi-
al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD
player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked
“TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your
TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then con-
nect the RF modulator to your TV’s antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.
Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks
A/V-compatible
or
wide screen TV
Stereo system
AUDIO OUT
DIGITAL AUDIO OUT
COAXIAL
L Y
VIDEO OUT CB / PB S-VIDEO OUT
CR / PR COMPONENT VIDEO OUT
R
To Right (red) and
Left (white)
AUDIO OUT jacks
To Right (red) and Left (white)
ANALOG AUDIO INPUT jacks To COMPONENT
VIDEO INPUT jack
To COMPONENT
VIDEO OUT jack
NOTES:
• If the output is Dolby Digital-encoded audio, connect a Dolby Digital decoder, and set “DOLBY DIGITAL” to “BITSTREAM” for
audio output in the setup mode.
• Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “DPCM” for audio output in the setup mode. Playing a
DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Connecting to a Dolby Digital decoder
If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround format, the DVD player outputs a Dolby Digital data stream from
its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard as can be heard in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
A/V-compatible
or
wide screen TV
Front
speaker
(left)
Center speaker
Front
speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right) Subwoofer
Dolby Digital
decoder
AUDIO OUT
DIGITAL AUDIO OUT
COAXIAL
L Y
VIDEO OUT CB / PB S-VIDEO OUT
CR / PR COMPONENT VIDEO OUT
R
To COAXIAL
DIGITAL AUDIO
OUT jack
To VIDEO INPUT jack To VIDEO OUT jack
To S-VIDEO
INPUT jack
To S-VIDEO
OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
or
NOTE:
• If your TV is compatible with 525p (480p) progressive scanning, connect the TV to Component Video Output jacks of the
DVD player, and make sure that “PROGRESSIVE” is “ON”. Refer to page 16 for more details.