Sharp DV-SL80U - Manual (Page 8)

– 8 – EN
1. Open the battery compartment cover.
2. Insert two AA batteries, with each one
oriented correctly.
3. Close the cover.
NOTES:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
Loading the Batteries
FUNCTIONAL OVERVIEW
Display
Displays During Operation
Lights up when the inserted
disc is being played back.
Displays a type of the disc
which is inserted on the tray.
• DVD: DVD
• CD: Audio CD, MP3
Lights up when the
inserted disc comes
to a pause.
Lights up when the
A-B repeat function is on Lights up when the
repeat function is on.
Lights up when playing back
in slow mode. (DVD)
Displays the elapsed time of the title
or track. The number of a new title,
chapter, or track is displayed when
a chapter or track is switched.
Lights up when the ALL
repeat function is on.
GROUP P.SCAN
DVD
CD
Lights up when the
progressive scan
system is activated.
Power on
No disc inserted or
cannot read the disc
Tray open
Tray closed
Loading the Disc
Power off
HOOK UPS
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colors of the jacks and plugs match up when using Audio/Video cables.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because
it may cause electrical interference when you are watching television programs.
Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack
AUDIO OUT
DIGITAL AUDIO OUT
COAXIAL
L Y
VIDEO OUT C B / P B S-VIDEO OUT
C R / P R COMPONENT VIDEO OUT
R
To Right (red)
and Left (white)
AUDIO OUT jacks
A/V-compatible or
wide screen TV
To VIDEO INPUT jack
To Right (red) and Left (white)
AUDIO INPUT jacks
To S-VIDEO OUT jack To S-VIDEO INPUT jack
To VIDEO OUT jack
or
Stereo system
A/V-compatible
or
wide screen TV
AUDIO OUT
DIGITAL AUDIO OUT
COAXIAL
L Y
VIDEO OUT C B / P B S-VIDEO OUT
C R / P R COMPONENT VIDEO OUT
R
or
To VIDEO INPUT jack
To Right (red) and Left (white)
ANALOG AUDIO INPUT jacks
To VIDEO OUT jack
To S-VIDEO
INPUT jack To S-VIDEO
OUT jack
To Right (red)
and Left (white)
AUDIO OUT jacks
The S-VIDEO connection provides a better quality video signal than the VIDEO (COMPOSITE) output. Use a commercially
available S-VIDEO cable to connect from the Player to the TV.
• When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection is
enabled (the VIDEO connection is disabled).
• You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cable (supplied) to a
monaural TV that has only one AUDIO input jack.