Sherwood RD-6108 - Manual (Page 19)

ENGLISH
19
LISTENING TO RADIO BROADCASTS
Presetting radio stations
Auto tuning
Each time this button is pressed, the mode changes
as follows;
Tuning mode : “PRESET” goes off.
Preset mode : “PRESET” lights up.
The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and “TUNED”.
If the station found is not the desired one, simply
repeat this operation.
Weak stations are skipped during auto tuning.
Manual tuning is useful when you already know the frequency of
the desired station.
Perform the steps 1 to 3 in “Auto tuning” procedure and press the
TUNING/PRESET UP(
) or DOWN( ) button repeatedly until
the right frequency has been reached.
You can store up to 30 preferred stations in the
memory.
“MEM” is flickering for 5 seconds.
Manual tuning
Each time this button is pressed, the band is changed
to FM or AM.
When pressing the BAND button without selecting
the TUNER, the tuner will be selected automatically.
Select the tuner.
1
Select the tuning mode.
3
Select the desired band.
2
Press the TUNING/PRESET UP( ) or
DOWN( ) button for more than 0.5
second.
4
Tune in the desired station with auto or
manual tuning.
1
Press the MEMORY/ENTER button.
2
or
AUDIO
POWER DISPLAY SLEEP VIDEO1
1 2 3 VIDEO2
4 5 6 VIDEO3
7 8 9 CD
T.TONE 0 P.SCAN TUNER
DSP MODE D.TIME ADJUST AUX
MUTE T.MON
CH. LEVEL
CH. SEL
MASTER VOLUME
REMOTE CONTROL UNIT RM-105
TUNER
AUTO
BAND
BAND FREQUENCY
MHz
T/P MODE
TUNING/PRESET
TUNING/PRESET
MEMO/ENTER