Schumacher Automatic SP1 - Manual (Page 9)

•8•
GROUNdiNG ANd AC POWER CORd CONNECTiONS 8.
RiSK OF ELECTRiC SHOCK OR FiRE.
This battery charger is for use on a 8.1
nominal 120-volt circuit. The plug must
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances. The
plug pins must fit the receptacle (outlet). Do not use with an
ungrounded system.
8.2 Never alter the AC cord or plug provided – if it
does not fit the outlet, have a proper grounded outlet installed by
a qualified electrician. An improper connection can result in a risk
of an electric shock or electrocution. NOTE: Pursuant to Canadian
Regulations, use of an adapter plug is not allowed in Canada.
Use of an adapter plug in the United States is not recommended
and should not be used.
Recommended minimum AWG size for extension cord:
8.3
100 feet (30.5 meters) long or less - use an 18 gauge (0.82 •
mm 2 ) extension cord.
Over 100 feet (30.5 meters) long - use a 16 gauge (1.31 mm • 2 )
extension cord.
FEATURES 9.
Battery Status LED’s 1.
12V Plug Cable 2.
Assembly
Ring Terminal Cable
3.
Assembly
Battery Clip Cable
4.
Assembly
Charger Quick-
5.
Connect Cable
1
2
3
4
5