Sony 3-270-909-11(1) - Manual (Page 17)

17
Getting S
tarted
If you want to control your TV with the
supplied remote
You can control the volume, input source, and power switch of
your Sony TV with the supplied remote.
To control other TVs with the remote
You can control the volume, input source, and power switch of non-
Sony TVs as well.
If your TV is listed in the table below, set the appropriate
manufacturer’s code.
1
While holding down TV [/1, press the number
buttons to select your TV manufacturer’s code
(see the table below).
2
Release TV [/1.
◆Code numbers of controllable TVs
If more than one code number is listed, try entering them one at
a time until you find the one that works with your TV.
◆To return the remote to its default settings
1
Remove the batteries from the remote.
2
Re-insert the batteries while pressing down 1, 2,
and 3 of the number buttons.
3
Wait for a few seconds.
Note
Depending on the connected unit, you may not be able to control your
TV using all or some of the buttons on the supplied remote.
By pressing You can
TV [/1 Turn the TV on or off.
VOL +/– Adjust the volume of the TV.
TV/VIDEO Switch the TV’s input source between the
TV and other input sources.
CH +/– Select the channel up and down.
MUTING Mute the sound (for Sony TV only).
DISPLAY
OPEN/
CLOSE
DIMMER
CLEAR
1 2 3
4 5 6
7 8
0
9
TV/VIDEO
AUDIO SUBTITLE ANGLE
SCAN
MUTING
PLAY MODE
PLAY SCAN
PREV SLOW/STEP NEXT
PAUSE
VOL CH
STOP
VIDEO
FORMAT
RED GREEN BLUE YELLOW
TOP
MENU
SYSTEM
MENU
POP UP/
MENU RETURN
TV
Number
buttons
MUTING
TV \/1
TV/VIDEO
CH +/–
VOL +/–
Manufacturer Code number
Sony 01 (default)
Daewoo 22, 04
Emerson 14
GE 06
Hitachi 02, 04
JVC 09
LG/Gold star 03, 17, 04
MGA/Mitsubishi 13, 04
NEC 04, 12
Panasonic 19
Philips 08, 21
Pioneer 16
RCA 10, 04
R.Shack 05
Samsung 04, 12, 20
Sanyo 11
Sharp 05, 18
Toshiba 07, 18
Zenith 15