Smooth Fitness 5.25 Motorized Treadmill - Manual (Page 36)

www.smoothfitness.com 36
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up Check the following:
ƒ Make sure the power cord is plugged into a surge
protector, the surge protector is plugged into a properly
grounded outlet and the surge protector is turned on
(refer to the Power Requirements section in this manual).
ƒ Equipment circuit breaker is in the reset position
ƒ Equipment power switch is in the on position
ƒ Safety key is properly inserted into the computer console
ƒ Wall outlet is properly functioning with correct voltage
(Have an electrician check for inadequate voltage at the
outlet refer to the Power Requirements section in this
manual)
ƒ House circuit breaker is reset and is the proper size.
(refer to the Power Requirements section in this manual)
Treadmill stops operation during use ƒ Safety key is properly inserted into the computer console
ƒ Equipment circuit breaker is in the reset position
ƒ House circuit breaker is reset, meets proper
requirements and if worn replaced by an electrician.
(refer to the Power Requirements section in this manual)
ƒ Program time has expired
Treadmill will not incline(Power fold models only) ƒ Check for proper positioning of spring knob for folding(See
procedure in owners manual)
Treadmill will not unfold Power Fold only
ƒ Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Manual Fold only
ƒ Folding locking lever is depressed
Treadmill running belt moves slower than speed displayed on
computer ƒ Metric/English conversion (See owners manual for
Metric/English conversion process)
Treadmill running belt moves slower than speed displayed on
computer ƒ Metric/English conversion (See owners manual for
Metric/English conversion process)
Running belt is not centered ƒ Treadmill is properly leveled(See procedure in owners
manual)
ƒ Center running belt (See Centering procedure in owners
manual)
Running belt is slipping or hesitating while in use ƒ
Tension running belt (See process in owners manual)
Treadmill running belt moves slower than speed displayed on
computer ƒ Metric/English conversion (See owners manual for
Metric/English conversion process)
Running belt is not centered ƒ Treadmill is properly leveled(See procedure in owners
manual)
ƒ Center running belt (See Centering procedure in owners
manual)
Running belt is slipping or hesitating while in use ƒ
Tension running belt (See process in owners manual)