Erasing multiple titles (erase titles) – Sony RDR-GXD500 User Manual
Page 70
D:\DVD
manual\Final\218839311_FM\01GB08EDIT.fm
master page=left
70
RDR-GXD5000
2-188-393-11(1)
“Protect”: Protects the title. Select “On” when
the Protection display appears. “
” appears
next to the protected title. To cancel the
protection, select “Off.”
“Title Name”: Allows you to enter or re-enter
a title name (page 37).
“Set Thumbnail”: Changes the title’s
thumbnail picture that appears in the Title List
(page 30).
“A-B Erase”: Erases a section of the title (see
below).
z
Hints
• You can erase multiple titles at one time (page 70), or
erase all of the titles on the disc at once (page 33).
• You can label or re-label DVDs (page 33).
Note
You cannot protect Playlist titles.
Erasing a section of a title
(A-B Erase)
You can select a section (scene) in a title and erase
it. Note that erasing scenes in a title cannot be
undone.
1
After step 2 of “Editing a Title,” select
“A-B Erase” and press ENTER.
The display for setting point A appears.
• When the title is protected, the display asks
for confirmation. To continue, select
“Change,” and when the protection display
appears, select “Off.”
2
Select point A by pressing
m
/
M
, and
press ENTER.
The display for setting point B appears.
3
Select point B by pressing
m
/
M
, and
press ENTER.
The display asks for confirmation. To reset
either point A or B, select “Change A” or
“Change B,” and go to step 2 or 3.
4
Select “OK,” and press ENTER.
The scene is erased, and the display asks
whether to erase another scene. To continue,
select “Yes,” and repeat from step 2. To finish,
select “No.”
z
Hint
A chapter mark is inserted after the scene was erased. The
chapter mark divides the title into separate chapters on
either side of the mark.
Notes
• Images or sound may be momentarily interrupted at the
point where you erase a section of a title.
• Sections shorter than five seconds may not be erased.
• For DVD+RWs, the erased section may be slightly
different from the points you selected.
Erasing multiple titles (Erase Titles)
You can select and erase two or more titles at one
time using the TOOLS menu.
1
Press TITLE LIST to turn on the Title List
menu, and press TOOLS.
The TOOLS menu appears.
2
Select “Erase Titles,” and press ENTER.
The display for selecting titles to be erased
appears.
+
RW
-RW
VR
A-B Erase (Set point A)
2 DEF 20:00-21:00
A 0:12:34
B : :
– – – – –
Playback point
A-B Erase (Set point B)
A 0:12:34
B 0:23:45
A
2 DEF 20:00-21:00
-RW
VR
-RW
Video
+
RW
-
R
+
R
01GB01.book Page 70 Mardi, 7. septembre 2004 9:41 09