Sony RDR-GXD500 User Manual
Page 24
RDR-GXD500
2-188-393-11(1)
24
D:\DVD
manual\Final\218839311_FM\01GB04BAS.fm
master page=left
10
Press ENTER.
The Setup Display for selecting the type of
video signal output from the LINE 1-TV jack
appears.
11
Select the type of signal you want to output
from the LINE1-TV jack.
“Video”: Outputs video signals.
“S Video”: Outputs S video signals.
“RGB”: Outputs RGB signals.
Note that if you select “On” in step 9, you
cannot select “RGB.”
• If you select “S Video” or “RGB,”
SMARTLINK will be deactivated.
12
Press ENTER.
The Setup Display for selecting the type of
jack used to connect to your amplifier
(receiver) appears.
13
Select the type of jack (if any) you are
using to connect to an amplifier (receiver),
and press ENTER.
If you did not connect an AV amplifier
(receiver), select “No,” then go to step 16.
If you connected an AV amplifier (receiver)
using just an audio cord, select “Yes: LINE 2
OUT (R-AUDIO-L),” then go to step 17.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT.”
14
Select the type of Dolby Digital signal you
wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
15
Press ENTER.
The Setup Display for the DTS signal appears.
16
Select whether or not you wish to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
17
Press ENTER when “Finish” appears.
Easy Setup is finished. All connections and
setup operations are complete.
To return to the previous step
Press O RETURN.
z
Hints
• If your AV amplifier (receiver) has an MPEG audio
decoder, set “MPEG” to “MPEG” (page 86).
• If you want to run Easy Setup again, select “Easy
Setup” in the Setup Display (page 90).
EASY SETUP
Line1 Output
4/5
Select the Line1 output signal.
Video
S Video
RGB
EASY SETUP
Audio Connection
5/5
Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.
Yes :
LINE2 OUT(R-AUDIO-L)
Yes :
DIGITAL OUT
No
Audio Connection
5/5
Dolby Digital
D-PCM
Dolby Digital
EASY SETUP
Audio Connection
5/5
DTS
On
Off
EASY SETUP
EASY SETUP
Easy Setup is finished.
Finish
01GB01.book Page 24 Mardi, 7. septembre 2004 9:41 09