Siemens C30 - Manual (Page 8)

13 12
Prefix phone numbers
Prefix phone numbers are built up
in the way that the first digits of
the number are prefix (the same for
e.g. the whole company), and the
last digit(s) is/are related to a spe-
cific person or office.
If you want to store the prefix
part of such a phone number in
your phone book, you do it in exact-
ly the same way as you store a nor-
mal phone number in your phone
book. Only, instead of each of the
additional digits that varies from
time to time, you enter a ”?” . This
is done by holding down the
key for approx. 2 seconds.
Facts & Tips
• Store frequently used phone num-
bers in location numbers 1 to 9 so
that you only need to press one key
to speed dial them (see p. 38).
• If you choose a location number that
is occupied, the phone will give you
the option of overwriting the existing
entry or pressing »EXIT« to see the
suggested location number again.
• Enter the phone number with the
help of "+" followed by the national
code so you can use your phone book
abroad without having to think about
international codes.
• The ringing tone that you select for a
phone number in your phone book,
will be the ringing tone you hear if a
person is calling you from this phone
number.
• Calling Line Identification is a net-
work feature whereby phone numbers
of callers to your phone are shown on
your phone’s display. If your caller is
one of the entries that you have stor-
ed in your phone book, then his/her
name will appear on your display.
Phone book
Phone book
Use your phone book for storing
names and telephone numbers. In
the table you can see how to find
the individual characters on the
keypad of your phone.
Storing entries
Enter phone number and
press .
Enter name and press »OK«.
Select which ringing tone you
want for this specific entry by
using and , and con-
firm by pressing »OK«.
The telephone will suggest that the
name/number should be stored
under the first vacant location num-
ber.
Press »OK« to accept the sug-
gested number, or press
»CLEAR« and enter a location
number of your own choice
(up to 3 digits).
Using your keypad
Each key of your phone’s keypad
contains a number of characters
which can be seen in this table:
• Press once to get the first charac-
ter, twice to get the second charac-
ter, etc.
• Hold down one of the keys for
one second to get the option of
lower case. Just press the key
again for one second to return to
upper case.
• Press # to get a space between
two characters.
• Press »CLEAR« briefly to delete
one character.
• Press »CLEAR« for one second
to delete the entire display.
1 . , ; : ' " ! ¡ ?
¿ & % @ §
£ $ ¥ ¤
A B C 2
Ж Е Д З
a b c 2 ж е д а
D E F 3 É ∆
d e f 3 й и
J K L 5
j k l 5
G H I 4 Γ
g h i 4 ì
M N O 6
Ш С Ц
Ω
m n o 6 ш с ц т
P Q R S 7 ß
Π Φ Ψ Σ Π Φ Ψ Σ
p q r s 7 Я Я
T U V 8 Ü Θ
t u v 8 ь щ
W X Y Z 9 Ξ
w x y z 9
Space
* + 0- ~ / \| ( )[]
{} = < >^_
User guide C30 GB 03/10/00 11:11 Side 12