Display symbols keypad functions – Siemens C30 User Manual
Page 28
53
Battery level
Battery is fully charged.
Battery is partly discharged.
Battery needs recharging. You
have limited conversation
time left.
Signal strength
The more signal bars displayed, the
better the radio connection. The
antenna symbol will be flashing
when the phone is searching for a
network.
Scrolling
There are more functions up or
down which you can access.
Volume level
Indicates volume level when
adjusting.
Calling
On: You are connected to
another phone number
Flashing: There is a new
incoming call for you, or you
are calling someone, but still
not connected.
You have missed two calls.
SMS
There is a new SMS for you.
On: There are still unread
SMSs in your inbox.
Flashing: The SMS memory is
full.
Selected item
Indicates which item has been
selected when you scroll through a
list of options.
Tones off
Indicates that all tones have been
disabled.
Call diversion
On: All calls to your mobile tele-
phone are diverted to another tele-
phone number.
Flashing: Status of your call diverts
is unknown.
Stopwatch
Indicates that the stopwatch is run-
ning.
Voice mail
Indicates that there is a voice mail
for you.
Display and keypad backlight
The backlight switches on automat-
ically when you press a key. In
standby mode the light will auto-
matically switch off if no key is
pressed for 10 seconds or more.
Display symbols
Keypad functions
52
On/off key and function keys
The left-hand function key turns
your phone on and off.
When the phone is on, the func-
tion of these two keys varies
according to whether you are in
standby or menu mode. The text
line at the bottom of the display
will inform you of the current func-
tion of each key at any time.
Voice mail
Press for one second and get quick
access to your voice mail (only if
the number is stored by you or
your network operator).
International numbers
Press for one second to insert a "+"
before international phone num-
bers.
Arrow keys up/down
For controlling volume level during
conversation, for moving cursor
when writing a message, for
scrolling through menus, phone
book, lists, messages, etc.
Extension numbers and
prefix numbers
Press for one second to insert a
pause (P) between the main num-
ber and the extension number.
Press for two seconds to insert a
"?" for each varying digit in a prefix
phone number (for storing in your
phone book).
Latest outgoing call
Press for one second and the call is
initiated automatically (only if you
have activated speed dialling).
User guide C30 GB 03/10/00 11:11 Side 52