Siemens C30 - Manual (Page 18)

33
Deactivation/activation
On some networks you have the
possibility of activating and de-
activating your call divert. This
means that once you have set a
call divert, you can select to deacti-
vate it, and then at a later moment
activate it again. Your telephone will
then remember your last setting
and you will not have to select
divert delay and phone number
again.
You find the option of activating or
deactivating by selecting the spe-
cific call divert you want to acti-
vate/deactivate and then select
»Deactivate« or »Activate«.
Facts & Tips
• If you have chosen to have all calls
diverted, the call divert indicator
will be visible in the display.
• Your selection of a specific kind of
call divert does not only give you the
possibility of setting it. At this level,
you also have the possibility of deacti-
vating/activating the call divert, the
option of seeing the status for this
specific kind of call divert by selecting
»Status« as well as the option of
cancelling this specific kind of call
divert by selecting »Clear« .
• If you try to deactivate/activate a call
divert and your network does not
allow this option, your display will tell
you that the service is not available. In
that case you must cancel a call diver-
sion by selecting »Clear« . Next time
you want your incoming calls divert-
ed, select »Set« .
Setup menu
Network services
32
Enter the Setup menu
by pressing »MENU«
Select »Network services«
Call divert
If you want to divert your incoming
calls to another phone number, you
have to:
Select one of the five options
of call divert.
Set your call divert.
Different options of call divert
Divert all calls Divert all calls that
are made to your phone.
Divert all unanswered This is an
umbrella function that covers the
next three options at the same
time; i.e. it diverts calls to your
phone:
• if your line is busy
• if you do not reply
• if there is no contact to the network.
Divert if busy Divert your calls if
your phone is busy.
Divert if no reply Divert your calls if
you do not reply.
Divert if no contact Divert your calls
if there is no contact to the net-
work.
Status Check if your phone is
diverted in any of the possible
ways.
Clear all Cancel all your call
diverts.
Set your call divert
Having selected one of the five
mentioned options for diverting
calls, you must select »Set«, and
your telephone will guide you
through the following one or two
steps:
Divert delay (only if you have
selected to divert »if no reply« or
»all unanswered«). Specify the
period of time that elapses before
the call is diverted. You can choose
to »Use default delay« or select a
period from 5 to 30 seconds.
Number. Enter the phone number
you want to divert to or select one
from your phone book using .
On some networks you can
press and your calls will be
diverted to your voice mail, see
p. 24.
Setup menu
First
User guide C30 GB 03/10/00 11:11 Side 32