Siemens C30 - Manual (Page 22)

41
Enter the Setup menu
by pressing »MENU«
Select »Message setup«
Send SMS setup
Enter this menu to set up the para-
meters for sending SMS. (To send
an SMS, see the List menu p. 23).
Service centre Enter this menu to
set up once and for all the parame-
ters concerning your service centre
(this is where your SMSs are
received and forwarded to the
recipient.) Your phone will guide
you through the necessary steps:
*Accept to add a service cen-
tre by pressing »OK«.
*Enter your network opera-
tor’s phone number for this
special service and confirm by
pressing »OK«.
*Enter the name of your
network operator and press
»OK«.
*Some network operators have
already entered their own name
and telephone number. In that case
you just have to select it by press-
ing »OK«.
Select a validity time for your
SMS and confirm your choice
by pressing »OK«.
The menu returns to »Service
centre«. Press »SELECT« and
then »OK«.
Now the name and the num-
ber of the service centre that
you have set up will be dis-
played. Press »SELECT« to
confirm.
Facts & Tips
• Remember to add "+" and national
code before the number of your net-
work operator so you can also send
SMS from abroad.
• The validity time is the period of
time that the SMS will remain with
your network operator if for some rea-
son it cannot be delivered at once.
• Having stored a service centre,
you might have the option of adding a
new service centre, deleting a stored
service centre or editing a stored
service centre.
• »Send SMS setup« continues on
the following page.
Message setup
Setup menu
Phone book setup
40
Enter the Setup menu
by pressing »MENU«
Select »Phone book setup«
With the Phone book setup you
have these three options:
Fixed dialling
Select whether you want the fixed
dialling phone book to be on or off
(read about fixed numbers for this
extra phone book, p. 20).
Barred dialling
Select whether you want the barred
dialling phone book to be on or off
(read about barred numbers for this
extra phone book, p. 20).
Delete call information
Delete all entries stored in the out-
going, answered and/or missed
calls lists.
Facts & Tips
• To enable fixed and barred dialling
you must enter your PUK2/PIN2 code.
• If you have turned on the fixed
dialling function, your ordinary phone
book will not be visible on the display,
and can thus not be accessed.
However, it will, of course, remain on
your SIM card and can be accessed
again by turning off the fixed dialling
function.
Setup menu
First First
User guide C30 GB 03/10/00 11:11 Side 40